Welcome to the Earthscope Strain Tools documentation!

earthscopestraintools is an open source python-based software package for utilizing borehole strainmeter data.

Contents:

• Installation Instructions
• Borehole Strainmeter Overview
  • Background
  • Instrumentation
  • Linearization and Calibration
  • Common Signals for Correction
  • References
• Data Availability
• Data Structures
  • Pandas DataFrames
  • On Disk
  • Timeseries Objects
• Metadata
  • earthscopestraintools.gtsm_metadata.GtsmMetadata
• Example of running level 2 processing steps
  • Acquire, decimate, convert the data from raw
  • Corrections
  • Additional Comparisons:
• Example of looking at high rate event data from a strainmeter
  • Load event data based on USGS event_id
  • Load raw strain data
  • Convert counts to microstrain
  • Interpolate and high pass filter (1000s cutoff)
  • Calculate dynamic strain and estimated magnitude using Barbour et al 2021
  • Plot any co-seismic offsets in regional strains
• Tidal Calibration
  • Aquire station metadata and decimated timeseries
  • Offset correction
  • Observed tidal analysis
  • Predicted tides
  • Orientation matrix
  • References
• BAYTAP-08 Demo
  • Download and prepare data
  • Run BAYTAP to calculate tidal parameters and pressure response
  • Calculate and plot corrections
  • Plot fully corrected vs trend corrected data
• Example of loading level 2 data from Earthscope Borehole Strainmeter Analysis Center
  • Select the station and time range, and then get the data
  • Apply corrections and view result
• API documentation
  • earthscopestraintools package
  • earthscopestraintools.ascii2tdb module
  • earthscopestraintools.ascii_tools module
  • earthscopestraintools.bottle module
  • earthscopestraintools.bottle2mseed module
  • earthscopestraintools.bottle2tdb module
  • earthscopestraintools.bottletar module
  • earthscopestraintools.datasources_api_interact module
  • earthscopestraintools.event module
  • earthscopestraintools.event_processing module
  • earthscopestraintools.gtsm_metadata module
  • earthscopestraintools.mseed_tools module
  • earthscopestraintools.processing module
  • earthscopestraintools.strain_visualization module
  • earthscopestraintools.tdb2ascii module
  • earthscopestraintools.tdb2tdb module
  • earthscopestraintools.tdb2ts module
  • earthscopestraintools.tiledbtools module
  • earthscopestraintools.timeseries module

Note

This package and its documentation are under development.